MGF and MG TF, Brakes, Brake Pipes & Fittings, Brake Pipes
 
Item
Part Description
Attribute Comment
Qty
 
1 SGB002570 - Pipe assembly brake master cylinder primary to 3 way connector Roll - Use as required X
2 SGB002570 - Pipe assembly brake master cylinder secondary to pressure reducing valve   X
3 SGB002570 - Pipe assembly brake 3 way connector to front hose   X
4 SGB002570 - Pipe assembly brake 3 way connector to front hose   X
5 SGB002570 - Pipe assembly brake 3 way connector to rear hose   X
6 SGB002570 - Pipe assembly brake 3 way connector to rear hose   X
7 SGB002570 - Pipe assembly brake valve to connector   X
8 SGB002570 - Pipe assembly brake master cylinder (primary) to modulator   X
9 SGB002570 - Pipe assembly brake master cylinder (secondary) to modulator   X
10 SGB002570 - Pipe assembly brake modulator to front hose (RH)   X
11 SGB002570 - Pipe assembly brake modulator to front hose (LH)   X
12 SGB002570 - Pipe assembly brake modulator to valve   X
13 TM110051 - Nut-tube-male - M10   X
13 TM112051 - Nut-tube-male - M12   X
14 TN110051 - Nut-tube-female - M10   X
15 SHB10006 - Hose brake front RH MGF 1
15  SHB10006SLP - Hose brake - Service Line Part front RH MGF 1
16  SHB10007 - Hose brake front LH MGF 1
16 SHB10007SLP - Hose brake - Service Line Part front LH MGF 1
17 SHB100611 - Hose brake - rear MGF 2
17  SHB000280 - Hose brake - rear MGTF 2
18 FB110121 - Bolt - M10 x 60   2
19 FX110041 - Locknut - M10   2
20  BNP1243 - Bolt brake hose to caliper   2
21 DJP5822 - Washer-sealing brake caliper hose banjo   4
22 EJP7813A - Clip-hose   2
23 SJD100880 - Valve assembly brake   1
24 FS106127P - Screw-flanged head - M6 x 12   1
25 NRC4251A - Connector brake front   1
26 NRC4251A - Connector brake rear   1
27 FB106067A - Bolt-flanged head   1
28 FN106047 - Nut-flange - M6 adapter to valve bracket   1
28 FN106047 - Nut-flange - M6 adapter to bulkhead   1
29 SYC100600 - Clip-cable   2
30 SYC100580 - Clip-pipe to engine bay and lower dash   5
30 SYC100580 - Clip-pipe 3 way connector to rear hose   2
31  SYC100562 - Clip-pipe multiple-underfloor   5
31  SYC100810 - Clip-pipe multiple-underfloor   5
31 UYC100230 - Clip-pipe multiple-underfloor   5
32 SYC100760 - Clip-brake pipe treble servo mounting bracket   1
33 ADU7004 - Clip-pipe to crosstube mounting brackets   2
34 SYC100750 - Clip underfloor rear   1
35 SGK100470 - Clip servo mounting bracket   1
36 ADU8190 - Clip brake pipe   2
900  SHB000350 - Hose brake - front MGTF, To 5D639630 2
900 SHB000870 - Hose brake - front MGTF, From 5D639631 2
Show fields from Show fields from Show fields from a related table
Report Name *
Description
Reports and Charts Panel
Each table has a panel listing its reports and charts, organized in groups.
Please wait while your new report is saved...
Field label
Column heading override
Justification
What does auto mean?
Fields in:

Fields to Extract:
Name for the new table:
Items in the new table are called:

When you bring additional fields into a conversion, Quickbase often finds inconsistencies. For example, say you're converting your Companies column into its own table. One company, Acme Corporation, has offices in New York, Dallas and Portland. So, when you add the City column to the conversion, Quickbase finds three different locations for Acme. A single value in the column you're converting can only match one value in any additional field. Quickbase needs you to clean up the extra cities before it can create your new table. To do so, you have one of two choices:

  • If you want to create three separate Acme records (Acme-New York, Acme-Dallas and Acme-Portland) click the Conform link at the top of the column.
  • If the dissimilar entries are mistakes (say Acme only has one office in New York and the other locations are data-entry errors) go back into your table and correct the inconsistenciesin this case, changing all locations to New York. Then try the conversion again.

Read more about converting a column into a table.